There isn’t a service manual just for that motor.
Some info may be found in this general service manual. Try copying and pasting this link to see if that will work.
file:///F:/11Outboards/11My%20Outboard%20Motors%20Help/Manuals/Manual%20Evinrude/EvinrudeSM1912-1945.pdf
For cleaning out dried up fuel I like Berrymans B12 using the same process as the Buccaneer
describes. It will affect your decal though so be careful with it. I use Gumout for cleaning other
fuel system parts. I don’t believe there are any seals in that motor. Use lubriplate 105 or corn
head grease in the gear case as a substitute for the original grease’s that are no longer available.
This person is reproducing gaskets for earlier outboards on eBay. He may be interested in
making you what you need. I, like many others, just make my own.
https://www.ebay.com/sch/i.html?item=265683099819&rt=nc&_trksid=p2047675.m3561.l2562&_ssn=johnfolke
Later coils can sometimes be adapted if necessary. Points should only need a cleaning.
A later condenser can be used if necessary.
Here is a video on how to remove the flywheel if there are no holes for a puller. I have welded 2 nuts together but if you just jam them together on the bolt it will work.
https://youtu.be/RWgE9XiIBnk
I hope this helps you some.
Tubs.
A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.
