Home › Forum › Ask A Member › Year of Manufacture and Diagrams Needed › Re: Year of Manufacture and Diagrams Needed
April 12, 2015 at 7:45 pm
#13807
The drive shaft has a spring midway down. Quite often the whole spring is bent or broken. Thats why its off center.
When you pull the front cover of the gearcase it should come right off with the prop shaft still inside the case.
If it doesnt first make sure the shift fork is free from the shift rod. Test by prying in the opening available. Then if it is still stuck remove the propeller and pin and pull the whole shaft out with the front cover.