Home › Forum › Ask A Member › Lower unit seal kit for 1954 Evinrude 15 › Reply To: Lower unit seal kit for 1954 Evinrude 15
I had an Evinrude Fastwin too. The shift shaft seal is below the brass guide / retainer for the shift shaft, just an O-ring. The case halves has a round rubber seal which is generic to omc products. Cut a lttle oversize when fitting into the cavity. I used silicone to hold it in place & help seal it. Then just the propshaft & driveshaft seals. Maybe if FrankR sees this post he will show a drawing of the parts list, help Frank please! If you can’t find the parts I bought a total rebuild kit for my Fastwin & forgot I had the box of parts in my shop. I just need help getting to the box now as I’m in a wheel chair now. just email me if you need any of my parts but I need part numbers to match the seals.