Reply To: 1955 Johnson 10 HP QD-16, driveshaft won’t engage with lower unit

Home › Forum › Ask A Member › 1955 Johnson 10 HP QD-16, driveshaft won’t engage with lower unit › Reply To: 1955 Johnson 10 HP QD-16, driveshaft won’t engage with lower unit

May 9, 2023 at 7:38 pm #276100
Chad Reeves
Participant

    Thank you all for your help and time. I am going to look into the hub in the prop to see if that is the problem, it very well could be, I have another prop at home I could put on the engine. As far as I know the lower unit gear case is the original, I know what you are talking about regarding the phillips screw in the lower unit and this lower unit does not have that. Though I will check again to make sure. I will look into both of these ideas when I get home from work. I’ll then try to run it in my tank and see what happens about it pumping water.

    Thanks!