Reply To: 303345 prop shaft SKF equivalent

Home › Forum › Ask A Member › 303345 prop shaft SKF equivalent › Reply To: 303345 prop shaft SKF equivalent

May 2, 2023 at 10:29 am #275806
JACQUES
Participant

    seemed ok  on the prop shaft  I installed 2 . one in each direction.  Outside one facing in and pushed in with a  socket and  hammer   and it did the job,

    on all these  SKF seals  I double coated them with  a latex type glue to help reduce rusting. expecially the outside one where  I brushed on  a third coating.

    the drive shaft  seal used the same size  if I recall….

    tested GC psi at 15           vacum was ok to 🙂

    my worst  reassembly headache  was  fixing the shock absorber  back to 6”- 11/16th ….welded it .

     

    Joining AOMCI has priviledges 🙂