Home › Forum › Ask A Member › steering friction adjustment screw › Reply To: steering friction adjustment screw
April 12, 2023 at 9:35 am
#275092
Let time be your helper on this. Suggest applying some heat ( propane torch) to the aluminum boss that the screw goes into… just warm, not enough to burn the paint. Appy penetration oil ( I don’t think much of WD40 as a penetrant) , then light hammer, tap – tap on the head of the screw. Then go have beer. Come back a few hours later and repeat, and repeat … maybe until you run out of beer. Can you grab the head with vice grips? maybe a long nose pair?
Joe B
Great advice. Only thing is I were to wait to run out of beer my liver would of quit functioning before the screw broke loose. Patience is key.