It’s hard to tell where your wires are going and what colors they are, even though the picture itself seems clear enough. From the vantage point of your picture, the colors don’t seem to make sense or match the directions that CDI has allowed us to see, online. (See link below.) Still, it seems like there is something off with the way it is hooked up under the flywheel….Are the white and gray wires the OEM kill switch wires, even though CDI says they should be brown? If so, those, at least, make sense. If your white and gray wires feed the dual coil pack, then one of them is grounded….
Those BIM units were the worst. They hardly ever worked, by the time they showed up at our shop. At the time, there was no CDI solution to the problem, either. They ran nicely, when they did have fire, though.
Long live American manufacturing!
