Reply To: Coil testing

[T….in Wisconsin]

Joe,

I may be reading to much into this.  When using a multimeter do I connect to both spark plug wires and take my reading or do I test them separately.  Referencing the above information is why I ask. “Since the “loop” includes BOTH spark plugs , it is very important that when pulling over a motor with this “ungrounded secondary” ignition system, to be sure that both wires are are connected to form at complete loop circuit” I understand this in reference to pulling the motor over, does it also apply when testing with a multimeter.

Respectfully, there are no d..b questions applies here….