Well Tubs…you did it again, you must have blown some of your magic dust thru the computer…I did what you said and TADA I have spark…even squirted a little oil/gas mix in the carb mounting flange and if FIRED UP!!!!! The original condenser( the guy that said the coil was good also said the condenser was bad) was bad so I replaced it with one from an A-25 parts motor. Now I’ll clean the carb up and put the gear case back on and run it in my test tank at work. BTW…in filling the gear case with corn head grease I took out the top slot head bolt( that holds the prop shaft end cap on)and filled the gear case until the grease came out the hole then took the water pump back out and the grease didn’t completely pack that area with grease so I think that might be the way to fill these motors. Good things are coming my way I believe 🙂
