Reply To: 1956 Evinrude 15 HP Stuck Driveshaft

Home › Forum › Ask A Member › 1956 Evinrude 15 HP Stuck Driveshaft › Reply To: 1956 Evinrude 15 HP Stuck Driveshaft

December 28, 2022 at 5:02 pm #270373
JOSEPH BRINCAT
Participant

    US MEMBER PAY BY CHECK

    Along the lines of what elgin said… with the lower unit attached, loosen the power head bolts a few turns, wedge the power head over a little and start the motor ( or spin it over with a drill). the mis-alignment will eventually break loose the joint.

    Joe B