Loosing the flywheel nut and taping on it
while lifting up on the flywheel may get it off
if its not too tight. If not you want to use this
method. It is very easy to damage the
end of the crankshaft on these. This method
will prevent that if done properly. The nuts are
small so just jamming two together probably
wont work. You may need to weld them together.
After each strike with the hammer you want to
check that the tool is still tight.
Tubs.
https://youtu.be/RWgE9XiIBnk
A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.
