Reply To: Replacing early Elto Ruddertwin Coil tube

[Monte NZ]

Thanks George and Tubs for your reply………you guys quite made my day!……..looks like the large Zephyr coil is the way to go.

The next thing is to find a suitable tube……….unfortunately everything down here is metric now, so I might have to do a bit of hunting.

Another question I have, relating to the original coil this time, is that although it works ok, I thought I would try testing it with my meter as I did on the Zephyr coil etc, but I couldn’t get any readings at all. …….I even tried my other ruddertwin, but no readings either…….where am I going wrong?

I have looked on the web without any luck, so if you could please tell  me the correct procedure it would be much appreciated.

Attached is a photo where I have numbered the wires.

https://photos.app.goo.gl/JCyr6F45mDR3HBLq9

Thanks again.

Monte NZ