Re: Neptune AA1 Flywheel

[hidditt]

Got the lower unit back together. Took off the lower unit inspection plate and found a very tight fitting washer above the drive gear. Just took a couple of minutes.Coxed the washer back onto the drive shaft and then put the gear back on, then tightened up the screws all around. Wow. What a simple system! Still some grease in the lower unit. Should I disassemble the lower unit and clean of the old grease, then replace with Lubriplate? Or should I just add some more grease through the filler hole?

FYI. The water pump appears to be all metal. I have never seen that design before.