Progress made on the coil swap today.
A little nervous cutting away precious metal on the mag plate,
near one coil bolt mount area on each coil, but I think all
will be A-okay..
I thought I may be able to use vertical universal condensers
to replace the old horizontally mounted ones, but even
though the height of the condensers wasn’t an issue,
the vertical condensers interfered with the point adjustment
travel.
I “may” try some careful surgery and swap the mount brackets
between the old and new condensers, and if that don’t work,
I may try a retrofit with axial capacitors.
I need to find some condensers with the removable mount bracket
for such occasions!
Prepare to be boarded!