Home › Forum › Ask A Member › Impeller – key vs pin to shaft › Re: Impeller – key vs pin to shaft
FrankR, I understand the powerhead side of the cooling system. What I am having trouble with (haven’t taken mine apart yet, but pics are good on page #2 of this post) is where does the returning water to the pump go? I see the other hole under the pump plate, but does that just connect with the water pick up hole or what? I’m missing something here. I knew the water pump was different and the two tubes brought the water around for a second pass. Just confused as to where it goes in the gearcase casting to get back into the pump to go back up to the powerhead. Maybe it will all be clear when I tear into it, but Im trying to be ready for all repairs when I’m in there. I’m going to try and bring this boat to Suwanee. Still got to put a transom in it too. May just replace the Tee Née trailer! Thanks.
Dan in TN