Home › Forum › Ask A Member › Can someone ID this Evinrude › Reply To: Can someone ID this Evinrude
Hello Steve., I always look for the obvious first with any motor I am working on. The order is compression, spark, and then fuel. When I started I had compression so then checked for spark. Had spark so tried to start and no go. Took carb apart and cleaned and tried again. Started second pull and quit immediately. I could not get it running long enough to adjust the carb. With the help of another member he pointed out another area to clean. Took carb apart again cleaned the port under the poppet valve and tried again. Now I had nothing but a sore arm from pulling the rope. So time to recheck. I had fuel in carb, I did not have spark. Primary had .4 ohms and the secondary showed 0. I did find a coil on ebay, actually the entire ignition plate and waiting on it to come in. I have just posted under member toys 3 more motors I acquired. Also posted videos of some of my motors on the lake under the video section. Pleasure to meet you.