Home › Forum › Ask A Member › 1947 Evinrude 4416 › Reply To: 1947 Evinrude 4416

#265053
Tubs
Participant



    With the magneto lever pointing to around 4 o’clock –
    Test #1 – Turn off the fuel – close the mixture screw all the way – take out
    the spark plug – ground the plug wire to the motor – pull the motor over
    5 or 6 times – put the spark plug back in – pull the motor over 3 or 4 times.
    If it starts and dies it was flooded.
    If it doesn’t start –
    Test #2 – With the gas still shut off and the mixture screw still closed all the
    way – ground the plug wire to the motor. Take out the spark plug – squirt
    some gas in the cylinder. With the plug wire still grounded to the motor –
    pull it over 5 or 6 times before you put the spark plug back in. Gas still off and
    mixture screw still closed all the way – pull the motor over 3 or 4 times. If it
    starts and dies your not getting gas into the motor.
    If it doesn’t start check compression.
    Tubs
    .

    A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

    1 user thanked author for this post.