Reply To: 1947 Evinrude 4416

Home › Forum › Ask A Member › 1947 Evinrude 4416 › Reply To: 1947 Evinrude 4416

August 27, 2022 at 5:31 pm #265046
William MacNeill
Participant

    Today was a total bust. Cleaned passage hole I initially missed and after putting back together now I can’t get it to fire at all. The carb is clean as a whistle. Should be starting so I decided to pull flywheel and check coil and condenser. Both tested good. Cleaned up the points which were also in good condition and set everything to spec. Checked for spark to the plug with tester and all is firing. Put it all back together and nada no start. I got spark and fuel. What am I missing??