Home › Forum › Ask A Member › Wards Sea King ring job parts › Reply To: Wards Sea King ring job parts
Richard if those motors were mine I would check for a stuck or sticky rings. I suggest pulling the plugs out and spinning the motors with an electric motor. Soak those cylinders with a thin liquid maybe wd40 or some mineral spirits. Has the motor been setting? Compression readings may be suspect if the old kickers have not run in a while. Spin the heck out of them with a drill motor let them set for a while then do it again. I will bet you compression will come up at least enough to get them running. Most of these old motors run better the more you run them. If they have no spark clean the points. Also welcome to our club and good luck.
dale