Home › Forum › Ask A Member › QD 21 Head bolts? › Reply To: QD 21 Head bolts?
I am waiting on the gasket but been checking things over on it and keep finding problems. I expected all new ignition but found the pistons hammered by what I am guessing the wrong plugs. the head had a couple chunks broke off it but I did have one from a 10 hp Evinrude so that will work. The head had been pried off by the previous owner and there was a couple gouges on the cylinder that I will try and repair with jb weld. Might end up being a parts motor! The pistons make me a bit nervous but will go ahead and put the head gasket on and see how the compression is. The cylinders look good as in no scoring so thats a plus. Needs the lower resealed to so lots to do if I try and save it. Thanks so far!