Reply To: Johnson TN-28 Mag Issues

Home › Forum › Ask A Member › Johnson TN-28 Mag Issues › Reply To: Johnson TN-28 Mag Issues

May 18, 2022 at 5:36 pm #260029
Buccaneer
Participant

    US Member

    The mag plate seems to be plenty snug, and in the several times I had it apart,
    I found no stray metal in the flywheel, or mag plate.
    The coils bolts were snugged down good, so I can’t imagine they’re moving.
    The last time I adjusted the coil positions, I put the problem lam “in” about .005
    further than my straight edge indicated necessary.
    The motor is on “Time Out” as it was a bad boy for not start last time!

    Prepare to be boarded!