here are some links to the Western Region AOMCI with great articles on testing repairing caps.
the author m.Mohat specifies 850v caps as the best solution for rebuild caps but 630v may be suitable nonetheless ….something to try out anyway
the square ones above can be stuffed in emptied capacior cans* as shown but nothing wrong with direct connections between grd and points hidden under the flywheel …see comment below from m.Mohat’s article
- just be certain to insulate the top wire from the side of the can. I have reused the old capacitor short carboard tubes
https://wrcoutboards.org/wp-content/uploads/2020/04/Part1_Condenser_Construction_Failure_Modes.pdf
https://wrcoutboards.org/wp-content/uploads/2020/04/Part3_Sizing_Condensers_Correctly.pdf
https://wrcoutboards.org/wp-content/uploads/2020/04/Part4_Repairing_Broken_Condensers.pdf
Joining AOMCI has priviledges 🙂
