Home › Forum › Ask A Member › 1929 Johnson Model J-25 Plug Wire › Reply To: 1929 Johnson Model J-25 Plug Wire

#259307
Buccaneer
Participant

    US Member

    Thanks for posting that spring tubs. I’ll dig around the waste tar a little
    to see if the baby (spring) got thrown out with the bath water.

    The spring looks like an attempt to insure electrical contact with the
    secondary button. You wouldn’t think it would hold up, or be too effective,
    but I did have continuity with the ohm meter from the plug terminal
    to the windings, before I tore it apart.
    FYI for anyone whose curious, The primary ohms on the coil were .1 K, secondary 5.2K.

    Perhaps I’ll solder a brass tab onto the secondary button and attach the plug wire
    like you did. Seems to me I may have done something similar on an A-45 or similar motor.

    Prepare to be boarded!