Reply To: 1956 OMC 15HP Crank Seal

Home › Forum › Ask A Member › 1956 OMC 15HP Crank Seal › Reply To: 1956 OMC 15HP Crank Seal

April 6, 2022 at 9:52 pm #257587
olcah
Participant

    US Member

    I was wondering that too. Kind of afraid of epoxy because of the heat.  It would be easy to make a sleeve and heat shrink it on but the sleeve would only be about 1/16 inch thick so it could just stretch and fall off with time.