Reply To: 1938 4261 Elto Handitwin gearcase issues

[Buccaneer]

I don’t have your motor, nor a parts diagram of one, therefore, photos of your
troubles may help, if you’re able to post them.
What material is the thrust plug made from? Plastic, Brass?
If you can’t get the old one out by soaking, tapping the gear case, or compressed air,
you might get by with making a new plug from round stock Delrin, or brass.

Regarding the gasket, you’ll have to make your own. I find that a curved manicurist
scissors works good for cutting the inner circle. You can cut the OD of the gasket
oversize so it doesn’t rip out while installing, then once the gear case is assembled,
trim off the excess with an exacto knife.

Prepare to be boarded!