The casting is pretty narrow in some motors, so a 3/8″ wide tool might be too big. Before I bought the OMC bushing tool, I used a 5/16″ punch to knock the bushing out and that worked pretty well. If you do a lot of motors, buy the tool – they are not that expensive.
Bob
1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1955 Johnson QD-16
1957 Evinrude Fastwin 18
1957 Evinrude 3022
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20
1982 Evinrude 25hp
“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."
