Reply To: Cam follower drops behind the cam CD11

Home › Forum › Ask A Member › Cam follower drops behind the cam CD11 › Reply To: Cam follower drops behind the cam CD11

February 5, 2022 at 4:22 pm #254070
JACQUES
Participant

    update:

    looks like the  little sleeve I added over the worn (50%)  cam follower  became the problem because the cam had trouble  sliding itself  behind the  cam  follower  to push it up from STOP to SLOW to START    mode position.

    the cam was  knocking against the sleeve  rather than sliding behind it to open the throttle plate.    the cam  just needed to be a bit thinner  at the low side so I just rehapped the end tip to  compensate for the  new sleeve thickness…

    it was not much but  the sleeve  messed up the cam to cam follower  ” relationship” 🙂

     

    Joining AOMCI has priviledges 🙂