Reply To: Cam follower worn half way CD-11

Home › Forum › Ask A Member › Cam follower worn half way CD-11 › Reply To: Cam follower worn half way CD-11

January 30, 2022 at 4:29 pm #253647
JACQUES
Participant

    Odd because it does look like stainless steel  and like Frank, I have seen cam wear more than  camm follower wear…..  but anything possible I guess.

    I any event for $3 cdn,  I found a nice   8”  X 1/4” OD brake line with perfect sized  ID to slide over  my 3/16  cam follower shaft where I applied my steel epoxy  to fill the gouge.

    I will  just cut a short piece  of tubing and slide it over the cam  follower  with a touch of  epoxy glue  and adjust the cam accordingly.

    the followwer return spring will be  replaced  for a more softer one to reduce needless fiction between   the cam and cam follower.

    should last long enough before I kick the habit. 🙂

     

    thanks all for comment and  FR’s offer 🙂

    Joining AOMCI has priviledges 🙂