Home › Forum › Ask A Member › 1967 sportwin 9_1/2 hp › Reply To: 1967 sportwin 9_1/2 hp
Ok Ive gotten back into this thing and I took the carb back off dis assembled and soaked in carb cleaner overbite. I took the two metal plugs out and found the plastic plug behind larger one. Got it out and cleaned the three tiny holes out. I felt like I got the carb clean. But as far as the high speed jet. Leroy says it’s accessable from the float bowl. The only thing I saw was the needle seat (replaced that. So now it will start easily and will run with no choke for a bit but it won’t idle down low too well. I’m also unsure of the setting for the butterfly. I can see a worn shiny spot on the armature so I set the butterfly to begin opening at this spot . It doesn’t open at all until about half throttle but I’m speaking of half throttle with it in neutral. In other words it’s better but still not idling well at low speed. I feel like I took everything loose on the carb that I knew and feel like it’s clean (carb cleaner/soak compressed air fishing line everything I know to do. Any suggestions or help once again appreciated
It's a jungle out there.