careful on the HS jet … if you do not have proper tools just pass a small mono filament to push out any crud…if any
DO NOT USE metallic wires 2-4 lb mono should do
if you shine a light in the carb bottom half and look into the HS jet you should see light clearly
blow everything (orifices you can find) with carb cleaner and compressed air
seems to have good compression won’t fly …. you need to measure !!! Leroy’s article says comp.#s are freqenttly high 60 low 70s for this motor
my own back-up kicker runs high 60s – low 70psi and runs like a charm all day long trolling
Joining AOMCI has priviledges 🙂
