Reply To: Evinrude 15032 starting problems

Home › Forum › Ask A Member › Evinrude 15032 starting problems › Reply To: Evinrude 15032 starting problems

December 21, 2021 at 1:24 pm #251510
frankr
Participant

    Plug wires on wrong plugs naturally is first thing to come to mind. But yes, front coil goes to top cylinder.

    “Good” spark will jump 1/4″ open air gap. Will it?

    It is possible it is getting too much gas (flooded). That also might explain the fuel dribble. Close the HS needle down to 5/8 to 3/4 turn and try choking it less. Is the motor sitting reasonably level when attempting to start?