Of all the O rings on OMC that seem to cause a problem in correct fitting are the small ones used in the twin-hose pressure tank fuel connector. There have been several proposed standard replacements for the originals, some seem too skinny some too fat. I’m not sure where we are on this one, at this point in time.
Joe B
McMaster-Carr sells the exact O-ring for the gas connector. You buy a bag of 100 for under $3.00. I’ve got a bag in the garage. I’m trying to think of the part number – I think it’s a #107, but not absolutely sure. Here is the site: https://www.mcmaster.com/o-rings/oil-resistant-buna-n-o-rings-8/
Dave
You are correct sir, I give everyone that buys a tool a free pair for their fitting.
http://www.richardsoutboardtools.com
classicomctools@gmail.com
