Home › Forum › Ask A Member › Redneck Keel Repair › Re: Redneck Keel Repair
January 8, 2016 at 4:36 pm
#29826
That is a big 10-4 ALWAYS use epoxy resin & for your use use laminating resin. Read instructions & mix a small amount & mix the resin so it will cure slowly. Temp matters too. Get everything ready before adding the hardener. Have your cloth on foil & saturate then wet the area & add the cloth transferring from the foil to the repair. have a windshield squeegie to remove the bubbles & let cure. Next sand & add finishing cloth. I get glass filler & mix & use like sanding putty I will send you a piece of cloth e mail me Jeff.50@cox.net..