Home › Forum › Ask A Member › 1948 Evinrude Light Four with no spark…need advice › Re: 1948 Evinrude Light Four with no spark…need advice
January 8, 2016 at 2:27 am
#29789
OK…this helps a lot.
Also, I looked up testing condensers and found that to test them, remove them from the circuit and connect the meter neg meter lead to ground and the pas meter lead to the pos contact. The meter set to ohms should show the needle climb as it is being charged. Then set the meter to DC volts and watch as the meter needle move back to 0.
When I connect my meter to the condenser (either condenser) I get nothing. The meter needle doesn’t move…ever.
Also, how do I tell which primary wire goes with which set of points?