Home › Forum › Ask A Member › 1948 Evinrude Light Four with no spark…need advice › Re: 1948 Evinrude Light Four with no spark…need advice
January 7, 2016 at 1:50 pm
#29742
To test for spark both plugs on one coil must be connected and grounded. The points need to read close to O ohms and you need to unhook the point wire or you will be reading across the coil. I use .18 mf 400v capacitors to replace condensers. The kill switch, condenser and point wires are all tied together. If you can’t get it working I have a working mag assembly.