Reply To: 1959 Evinrude 18hp “Golden Jubilee”

Home › Forum › Ask A Member › 1959 Evinrude 18hp “Golden Jubilee” › Reply To: 1959 Evinrude 18hp “Golden Jubilee”

November 7, 2021 at 6:54 pm #249337
OB1
Participant

    OK – Got it set… Initially I still couldn’t get the roller off the cam platte even at full inward adjustment. Eventually, I decided the throttle linkage position at the carb was out of whack. So I gave it a few firm blows with a brass drift & hammer to bend the carb linkage connections slightly. Dialed right in after that.