Home › Forum › Ask A Member › Gear Case too tight after assembly › Re: Gear Case too tight after assembly
January 1, 2016 at 5:24 pm
#29521
My first experience with mechanics I asked our neighbor if I could change the oil in his lawn mower. It was early 60’s & I removed the air filter top & started to fill to the oil fill mark. Little did I know I was filling up the carb with oil & it was a oil bath filter. It was very hard to start full of oil. I figured out what I did & reversed my actions the best I could. Ended up pulling the flatheads head & removing the oil & it started finally. Yes I learned how to change the oil in the oil bath filter.