Reply To: Impeller drive pin/key

Home › Forum › Ask A Member › Impeller drive pin/key › Reply To: Impeller drive pin/key

August 31, 2021 at 1:51 pm #245848
JOSEPH BRINCAT
Participant

    US MEMBER PAY BY CHECK

    What footdoc says could be true after long storage. However there is a solution to the problem. If you are handy with a file, you can make a “T” shaped key that will act as a full key in the plastic hub keyway and have the other end pin shaped to fit in the shaft pin hole.

    Joe B .