To find the point where you want the timer
set at, spin the flywheel as if your trying to
start the motor. Notice where you release
the knob. Set the timer so you get the spark
at this point. If the timer is set too far past
TDC it wont have enough “kick” to get
the motor spinning forward. You may feel
it fire as your pulling the flywheel back. If
not far enough past TDC there is no spark to
start the motor. From time to time you want
to be checking the plug to be sure your not
flooded and spin the flywheel with the plug
out to be sure you don’t have an over rich
mixture till you learn the correct fuel and timer
settings for starting.
Tubs
A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.
