Home › Forum › Ask A Member › Wisconsin RBM starting help › Reply To: Wisconsin RBM starting help

#245403
Tubs
Participant



    The ooze coming from the exhaust would
    seem to indicate to much fuel. When a motor
    wont start take out the plug an check to see if
    it is wet. If it is shake out the fuel or better yet
    blow it dry with air. Spin the motor over a
    dozen times or more with the plug out. Then
    put the plug back in and with the mixture screw
    closed all the way try to start the motor so it
    can clean itself out. To start a motor by bouncing
    it off compression you need to have the spark plug
    firing after TDC. As you spin the motor
    backwards the plug fires before the piston reaches
    TDC causing the motor to reverse direction and
    take off going forward. When your spinning it
    backwards the point that you releasing the knob
    is where you want the plug to fire.
    Tubs

    A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.