Home › Forum › Ask A Member › Wisconsin RBM starting help › Reply To: Wisconsin RBM starting help

#245399
Tubs
Participant



    The ooze coming from the exhaust would
    seem to indicate to much fuel. When a motor
    wont start take out the plug an check to see if
    it is wet. If it is shake out the fuel or better yet
    blow it dry with air. Spin the motor over a
    dozen times or more with the plug out. Then
    put the plug back in and with the mixture screw
    closed all the way try to start the motor so it
    can clean itself out. To start a motor by
    bouncing it off compression you need to have
    the spark plug firing after TDC. As you spin the
    motor backwards the plug fires before the piston
    reaches TDC causing the motor to reverse
    direction and take off going forward. When your
    spinning it backwards the point where your
    releasing the knob is the point where you want
    the plug to fire.
    Tubs

    A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.

    • This reply was modified 5 years, 2 months ago by Tubs.
    • This reply was modified 5 years, 2 months ago by Tubs.
    • This reply was modified 5 years, 2 months ago by Tubs.
    • This reply was modified 5 years, 2 months ago by CHUCK.