Reply To: Magneto Plate Binding

Home › Forum › Ask A Member › Magneto Plate Binding › Reply To: Magneto Plate Binding

August 8, 2021 at 5:16 pm #244473
frankr
Participant
    mark weaver wrote:

    I think that retaining ring goes taper UP. That allows the ring to go up through the brass ring about a 1/16 or so and that gives you space between the retainer and the brass ring when tightened to the mag base.

    Nope, not so. The flat side gores up. I agree, the support ring has been bent by somebody.