Re: 1955 Fleetwin Exhaust Cover and Baffle

Home › Forum › Ask A Member › 1955 Fleetwin Exhaust Cover and Baffle › Re: 1955 Fleetwin Exhaust Cover and Baffle

December 30, 2015 at 9:45 pm #29406
aquasonic
Participant

    Thanks Zephyr. The plate looks good, but before I cleaned it up, there were powdery rusty color deposits on the exhaust cover side. I suspect that it was from the rusty red primer that OMC used all over on the power heads. Like many of the motors I work on, this is a mixed use motor with both saltwater and freshwater use.

    Improvise-Adapt-Overcome