Reply To: 1923 elto rudder twin questions

[skier167]

Update on the ruddertwin. She is allmost done. Just about ready to be started with the exception of an issue that came up with the pump housing. The tee broke off in the house and I tried everything to remove it including left turning bit. Not one of my finer moments but I decided to drill and retap. Ended up blowing out the side of the threads where the mounting screw hole is and now I’m either on the hunt for a replacement or come up with a way to repair this one. I was wondering if I used a brass tube to sleeve the hole, secure with a brazing rod and retapped the new hole would work? I’m also open to any other ideas.