Reply To: 1956 Evinrude 15hp Throttle Q and Fouling

Home › Forum › Ask A Member › 1956 Evinrude 15hp Throttle Q and Fouling › Reply To: 1956 Evinrude 15hp Throttle Q and Fouling

July 30, 2021 at 12:09 pm #243967
Don
Participant

    US Member
    andreaskc wrote:

    Probably overkill, but here’s my flywheel puller plate

    Well, it might look like overkill, but those big flywheels/tapers are a mighty tight fit…..The OMC puller/hardware should really be used for these larger flywheels. Please make sure the flywheel is properly torqued also…Don’t just use an impact gun….After all this, you sure don’t want the key to shear, mess up the crank/flywheel tapers, and lose ignition….