high speed nozzle cleaned out with a wire and base gasket in place ??
what about top LS drip chamber and that really small orifice in the side channel feeding fuel the top drip chamber
did you carb clean and blow out all sections HS jet cleaned out ?
do you feel air sucked in the carb (get a friend to pull the cord while you put your closed fingers in front of the carb)
carb vent open ? carb gasket in place
my 9.5 works fine at 65 psi…work on the carb how was the engine running before the new kit ??
Joining AOMCI has priviledges 🙂
