Home › Forum › Ask A Member › Replacing the shift rod o-ring, do the bushing as well? › Re: Replacing the shift rod o-ring, do the bushing as well?
December 27, 2015 at 1:18 pm
#29271
Yeah I have to say knock on wood, Ive never really had a problem with any of those. Couple quick raps with the tool and hammer and they always just pop out. There is nothing wrong with re using them. Then simply hold the seal in place. If a bit worn, run a bead of 847 around the circ of it. The trick to reinstall, is how far down to tap it. Too far, and you will crush the seal too much, too little, and not enough crush. You get the feel for it.