Reply To: 1925 Ruddertwin carb

Home › Forum › Ask A Member › 1925 Ruddertwin carb › Reply To: 1925 Ruddertwin carb

July 2, 2021 at 2:17 pm #241753
BROOK E. NEWCOMB
Participant

    US MEMBER PAY BY CHECK

    Make sure fuel cap is venting.
    Make sure your fuel screen, line and carb are clean.
    Push up the poppet valve stem from under the carb.
    From the closed position open the needle valve until
    Fuel drips out onto your finger. Start motor adjust
    Needle valve accordingly.
    Setting will vary slightly from motor to motor.

    It always good to make sure your battery is charged
    up as well.

    Respectfully,
    Brook