Home › Forum › Ask A Member › Timing a 6HP Johnson 1989 › Reply To: Timing a 6HP Johnson 1989

#241299
joesnuffy
Participant

    I disconnected the small primer line pumped fuel bulb with primer all the way in and no fuel came out small hose. I also started motor and pulled small primer line off while motor was running and no fuel was coming out I rev’d motor with it off and no fuel sprayed out of it. But it is just plain weird when I pinch it off with needle nose pliers while running the engine dies. I don’t think their is anything wrong because I can rev the motor like crazy and it revs like normal it has to be pulling off the main jet I would think to do that.

    I re-checked the bottom plug and it still is wet looks like water I got the gaskets on order. That motor only has 6 head bolts that’s just crazy.

    Also when I pull bottom spark plug wire with engine running no change in its running or its ability to rev up and down. I put screw driver into the boot up against block and plenty of fire on that coil.

    That’s what I found so far,

    Thanks,
    Joe

    ps I think what I will try next is to remove foot start engine for like 25 seconds/smooths out shut it down then remove top spark plug and see if it will start.

    https://SecreLocal.com - - No Verify - Anonymous Adult Dating -

    • This reply was modified 5 years, 4 months ago by joesnuffy.
    • This reply was modified 5 years, 4 months ago by joesnuffy.