Reply To: 1980 12hp Evinrude Worktwin

Home › Forum › Ask A Member › 1980 12hp Evinrude Worktwin › Reply To: 1980 12hp Evinrude Worktwin

June 24, 2021 at 12:54 am #241096
Mumbles
Participant

    I think billw is on the right track as I measured some shafts and liners today and here’s what I got.

    Shafts
    5.5 – 6………………0.428″
    60’s ten horse…..0.550
    9.9/15……………..0.500
    ’59 18 horse…….0.500

    Liners
    77-79 six horse…….1.316 wide by .695 deep
    9.9/15…………………1.316 wide by .695 deep

    All measurements are plus/minus.